
GBS Automation – Standard Conditions of Sale
- FORMATION AND SCOPE OF CONTRACT
All contracts made by Seller for the supplies of plant and/or services are made on these Conditions. In submitting its purchase order, accepting delivery or paying any part of the Contract Price, Buyer agrees to the incorporation of these Conditions in place of any printed provisions on Buyer’s documents. Seller shall only be bound when Seller has signed and sent to Buyer its order confirmation or invoice. The Contract sets out all of the terms relating to the supply of the Plant and the Works and comprises, in the following order of priority: Seller’s order
confirmation; these Conditions; Seller’s tender or quotation; and the Specification. All other terms, conditions, warranties, guarantees and representations whether express or implied and wherever set out are expressly excluded. All illustrations and descriptions in Seller’s price list, catalogues or sales literature are approximate and may not be relied on by Buyer. - CONTRACT PRICE
Unless otherwise stated elsewhere in the Contract, the Contract Price:
a) excludes VAT or other applicable taxes or duties;
b) excludes the costs of delivery and packing;
c) may be varied by Seller to take account of any increases in wages, material or other costs or any changes in legislation or standards after the date of Seller’s quotation;
d) Is subject to correction on account of typographical errors and omissions. The Contract Price may be varied at any time to take account either of any increase in cost to Seller which results from any delay, default, act or omission on the part of Buyer or of any variation in the Contract in accordance with these Conditions. Time shall be of the essence in relation to all payments due from the Buyer - BUYER’S RESPONSIBILITIES
a) Buyer agrees to perform all obligations and responsibilities on it under the Contract with all due skill and care, without negligence or other breach of duty, at its own cost and by the time specified in the Contract for such compliance or, if no time is stated, in good time to allow Seller to perform its obligations. Buyer shall be responsible for all reasonable costs, which accrue to Seller as a result of Buyer’s delay, negligence or default. Unless and to the extent otherwise stated elsewhere in the Contract, Buyer is responsible for the giving of all notices and the obtaining of all licences, consents, authorisations and permits required for the carrying out of the Works.
b) If the Contract does not specify that Buyer is to provide certain services or facilities, Buyer shall provide such services and/or facilities, as Seller reasonably requires. Except where the Contract expressly provides that Seller is responsible for site safety, Buyer shall ensure that the Site is safe. - DESIGNS AND OTHER VARIATIONS
a) Seller may vary the design or specification of the Plant or the manner of execution of the Works in order to improve the Plant or to satisfy legal requirements provided that such variations shall not materially affect the performance of the Plant.
b) Unless expressly set out elsewhere in the Contract, the Contract may only be varied with the prior written agreement of Seller. Seller shall use all reasonable endeavours to comply with any reasonable request of Buyer to modify the Plant or the Works, subject to Seller and Buyer agreeing any consequent variations to the Contract Price, schedule or other terms of the Contract. - INTELLECTUAL PROPERTY RIGHTS, CONFIDENTIALITY AND DRAWINGS
a) All drawings, specifications, manuals and other literature prepared by or on behalf of Seller, all Intellectual Property Rights in them and all Intellectual Property Rights arising in the course of the Works or in the Plant shall belong to Seller.
b) Buyer shall have a licence to use any standard operating instructions, CDs, manuals and layout drawings supplied by Seller to Buyer under the Contract in the servicing, repair and maintenance of the Plant. All information received from Seller which is marked as confidential or which Buyer should have been aware is by its nature confidential shall be kept confidential by Buyer and shall not be copied or disclosed to any third party nor used other than for the purposes set out in this Condition 5.2. Unless
Seller is obliged to provide such information to Buyer under the Contract, Buyer shall return to Seller all information provided by Seller on Seller’s request.
c) Any documents required to be approved by Buyer under the Contract shall be deemed to be approved unless returned to Seller with full written comments within 7 days of their submission.
d) Buyer shall ensure that neither the use of designs, drawings or specification supplied by Buyer nor the undertaking of the Works nor the supply of the Plant in accordance with such designs, drawings or specifications shall infringe any Intellectual Property Rights of any person anywhere in the world. - INSPECTION AND TESTS
a) Unless expressly set out elsewhere in the Contract, the tests to be carried out on the Plant shall be such tests as Seller would normally carry out (if any). Buyer shall be entitled to receive notice of and attend all tests and shall give Seller not less than [7] days’ notice of its intention to attend. If Buyer fails to attend the tests or to carry out any tests or inspections which Buyer is entitled to carry out under the Contract on the date(s) prescribed by Seller, Buyer shall be bound by the results of Seller’s tests and/or inspections (if any) and may not object to them. - DATES FOR PERFORMANCE
a) If it is expressly agreed elsewhere in the Contract that Seller is liable for a delay or default in the performance of any of its obligations under the Contract, Seller’s liability for such delay or default shall be limited to the amount of damages (if any) stated to be payable on such delay or default. Otherwise, all dates specified for the performance of Seller’s obligation(s) (including dates for delivery or Completion) are estimates only and time shall not be of the essence in relation to any of them. Any dates for performance may be varied by Seller to take account of any delay resulting from any delay, default, act or omission on the part of Buyer or any variation in the Contract in accordance with these Conditions. - DELIVERY, RISK AND TITLE
a) Unless expressly set out elsewhere in the Contract, the Plant shall be delivered utilising the latest Incoterms (as defined in Incoterms 2020). If Buyer does not take delivery of the Plant on the date on which Seller has notified Buyer, the Plant is available for delivery Seller may charge Buyer for storage. Seller may make partial deliveries. Where Buyer maintains that any Plant has been delivered in a damaged condition or has not been delivered, Buyer shall make its claim in writing to Seller within a reasonable time, failing which its claim shall lapse.
b) Risk in the Plant shall pass to Buyer on delivery or, if Buyer does not take delivery when notified, on the date when Buyer should have taken delivery.
c) Title to the Plant shall not pass to Buyer until payment in full of the Contract Price. Until such time, Buyer shall not sell, charge or otherwise dispose of the Plant nor allow any distress or other form of execution to be executed on the Plant. Until title passes, Seller may enter any premises at which the Plant is kept and inspect or remove the Plant and Buyer grants to Seller an irrevocable licence to do so. - TERMS OF PAYMENT
a) The Contract Price and all other sums due under the Contract shall be paid in accordance with the terms set out elsewhere in the Contract or, if none, prior to delivery. All payments shall be made in cleared funds by the date(s), in the currency and to the address on Seller’s invoice. Where any payment is not made on the due date, Seller may charge Buyer interest on the amount overdue at the rate of 2% per annum above the base rate from time to time of Lloyds Bank plc from the due date for payment until payment in full. - SELLER’S LIABILITY FOR DEFECTS
b) Seller agrees that if any defect in the design, workmanship or materials used in that part of the Plant manufactured by Seller arises during the Warranty Period, Seller shall, at its option, either repair or replace free of charge the defective part of such Plant or refund to Buyer an amount equal that part of the Contract Price as relates to the defective Plant. Fitting of replacement part is Buyer’s responsibility.
c) Where a defect arises in relation to any part of the Plant not manufactured by Seller, Seller shall transfer to Buyer such warranties – if any – from the supplier of such Plant as are capable of transfer but makes no warranty in relation to and shall have no liability in respect of that Plant.
d) Seller will not be liable:
d.1) unless Buyer promptly notifies Seller in writing upon such defect arising and supplies Seller with such information in relation to the delivery storage installation commissioning servicing maintenance and use of the Plant as Seller shall reasonably require;
d.2) if the defect arises as a result of misuse, neglect, wilful damage, negligence (other than on the part of Seller), lack of servicing or maintenance, abnormal working conditions, failure to comply with Seller’s instructions, failure to comply
with good engineering practice, use of materials other than those referred to in the Specification, dismantling, alteration or repair;
d.3) in relation to fair wear and tear;
d.4) In relation to defects resulting from Buyer’s instructions, designs or specifications or as a result of the installation or commissioning of the Plant other than by Seller.
d.5) where the defect arises as a result of any defect in, non-compatibility of or unsuitability of any plant or equipment not supplied by Seller;
d.6) If the Contract so provides, where the Plant has been in operation for more than the specified number of hours.
d.7) Where Buyer has used in the Plant replacement parts not manufactured or supplied by Seller.
e) Unless Seller has expressly agreed elsewhere in the Contract to give a warranty in relation to such equipment and the period during which such warranty would apply, the obligations of Seller under this Condition 10 shall not apply to any second hand or reconditioned Plant, in relation to which no warranties, representations or guarantees are given nor to the Software, to which Condition 11 applies. - SOFTWARE
a) Title to and copyright in Seller’s Software shall at all times remain with Seller. On Completion Seller will grant Buyer a nonexclusive licence to use Seller’s Software in operating the Plant at Buyer’s site for the purposes of its business. Buyer may make one copy only of Seller’s Software for its own internal back up purposes and shall ensure that such copy acknowledges Seller’s copyright and other rights in Seller’s Software. Buyer may use Seller’s Software in machine readable code only and – except to the extent permitted at law – shall not copy, modify, disassemble, reverse engineer nor decompile Seller’s Software. Without limiting any other obligation of Buyer, Buyer shall use all reasonable endeavours to safeguard Seller’s rights in Seller’s Software and shall at all times keep Seller’s Software confidential and shall not use the same except in so far as may be necessary for the purposes of and as permitted by the Contract nor disclose the same to any third party other than with the express prior written consent of Seller.
b) Seller warrants that Seller’s Software shall perform substantially in accordance with the functional specification set out in the Specification and that the media on which Seller’s Software is provided is free from defects in design, materials and workmanship Failure to comply with this warranty during the Warranty Period shall constitute a defect which Seller will, if appropriate, remedy in accordance with Condition 10.1, subject always to the limitations in Condition 10.3.
c) Title to and copyright in any Third Party Software shall at all times remain with the relevant third party. On Completion Seller shall provide to Buyer the Third Party Software and transfer to Buyer such rights (if any) as Seller has in respect of the Third Party Software. Seller will provide to Buyer copies of the licences on which such Third Party Software Is provided by its owners and Buyer agrees to comply with all provisions of such licences.
d) Except as set out in this condition 12, Seller gives no other warranties and makes no representations in relation to Seller’s Software nor are the Third Party Software and all other warranties or representations expressly excluded. - LIMITATIONS OF LIABILITY
a) This Contract is intended to be inclusive and the rights, obligations and remedies of Seller and Buyer under the Contract (including as to the extent of supply) are as set out in the Contract to the exclusion of all other rights and obligations arising out of or in connection with the Contract, the Plant or the Works.
b) Seller has warranted to Buyer as set out in Conditions 10 and 11.2 and may have provided express warranties of performance elsewhere in the Contract but otherwise Seller makes no warranty or representation in relation to and gives no guarantee and shall have no liability in respect of the Plant or the Works and any such warranties, representations and/or liability are expressly excluded.
c) In relation to any claim for death or personal injury resulting from its negligence, the liability of Seller shall be unlimited. In relation to any claim for damage to tangible property resulting solely and directly from the negligence of the Seller, the liability of the Seller to Buyer shall be limited to an amount equal to the Contract Price. All other or further liability (however arising, including in negligence) is hereby expressly excluded, even if Seller was aware of the possibility of Buyer’s loss.
d) Seller shall have no liability to Buyer in respect of any loss of profit, loss of goodwill, loss of contract, loss of business, loss of opportunity, loss of production, additional staffing costs, loss of materials or product, recall costs nor for any financial or economic loss nor for any consequential loss or for special or punitive damages (whether in contract, statutory duty, tort including negligence or otherwise and however arising or claimed) and any such liability is excluded. Except as expressly contemplated by the Contract, neither party shall have any liability to the other for any damages or losses (whether arising in contract, statutory duty, tort including negligence or otherwise). Any limitation or exclusion of liability in the Contract shall apply to the fullest extent permitted by law, regardless of how such liability arises (including in negligence) or whether the party who would otherwise be liable may have been aware of the possibility of the other party’s loss.
Innovation – Automation – Integration Page | 3 - TERMINATION AND SUSPENSION
a) The provisions of Conditions [7, 11 and 12] shall survive any termination of the Contract
b) If Buyer fails to perform its obligations under the Contract when due or breaches any duty or obligation imposed on it, Seller may suspend the carrying out of the Works until such time as the breach is remedied and/or the obligation performed and/or demand immediate payment by Buyer of a sum equal to the value of the Works undertaken by Seller at such date (being not less than al l Seller’s costs at such date, including those associated with termination and suspension) together with a sum in respect of Seller’s profit as reasonably estimated by Seller.
c) If either party shall propose a scheme or other arrangement or compromise with its, his or her creditors or shall become insolvent or (being a company) have a receiver appointed in respect of all or any part of its assets, have a petition presented for its winding up or the appointment of an administrator or shall take any steps with a view to its liquidation or (being an individual) shall have
a petition presented for or otherwise file for his or her bankruptcy or in either case be subject to analogous events in any other jurisdiction, the other party may terminate the Contract by written notice effective immediately. - GENERAL
a) Neither party shall be liable in respect of any failure to perform its obligations under the Contract where such failure results from circumstances beyond that party’s control, including but not limited to fire, explosion, flood, storm, power cut, labour dispute, power, fuel or materials, failures of its subcontractors, suppliers or transport, act of government or God. While such circumstances continue the affected party shall be granted a reasonable extension of time for the performance of its obligations and if Seller shall be entitled to be paid such part of the Contract Price as relates to the Works undertaken or the Plant supplied by it at that date.
b) Buyer may not exercise any right of set off, deduction, withholding, counterclaim or other reduction in respect of any sums due to Seller.
c) Neither party may assign its rights or obligations under the Contract without the prior written consent of the other. Seller shall be entitled to subcontract all or any part of its obligations under the Contract. Each party shall be responsible for the acts and omissions of their respective employees, subcontractors, agents and other representatives.
d) Where either party may provide its consent or approval under the Contract, the provision of such consent or approval shall not be unreasonably withheld or delayed.
e) The Contract shall be governed by English law, shall be deemed to have been made in England and shall be subject to the exclusive jurisdiction of the English Courts. - INTERPRETATION AND DEFINITION
“Contract” means all or any part of the contract for the supply of the Plant and the Works, constituted in accordance with Condition 2. “Contract Price” means the price for the Plant and the Works set out in the Contract; “Works” means all or any of the works to be undertaken by Seller in designing, supplying, installing and/or commissioning (as appropriate) the Plant, as described in the Specification; “Plant” all or any of plant and equipment (including any Software) to be supplied by Seller to Buyer under the Contract, as described in the Specification; “Completion” means the date upon which the Works are complete, as determined in accordance with provisions set out elsewhere in the Contract or if none, as notified by Seller to Buyer; “Specification” Seller’s specification of the Plant and the Works as amended from time to time in accordance with these Conditions;
“Software” means all software and firmware to be supplied by Seller to Buyer as part of the Plant, as described in the Specification; “Seller’s Software” means that part of the Software as is owned or written by or on behalf of Seller;
“Third Party Software” means that part of the Software as is owned or written by or on behalf of any third party; “Intellectual Property Rights” means all patents, trade names or marks, service marks, copyright, moral rights and design rights and all mask work, trade secrets, know how and other intellectual property rights (whether, in any case, registered or unregistered and wherever subsisting)
and any right to register any of them; “Warranty Period” means the period during which Seller agrees to remedy defects in the Plant in accordance with Condition 11, being such period as is specified elsewhere in the Contract or, if none, twelve months from the date upon which the equipment is first used in production or eighteen months from delivery whichever is the earlier.
September 2026